Nortel Modular ICS 4.0 Manual page 33

If the set has already been given a name, it appears after
221:221ˆ
Name:221
CHANGE
Decide what name you want to give to the telephone number.
Name:___
Name:J
BKSP
Name:J___
<-- BKSP
Name:JEAN B
<-- BKSP
The name can be up to 7 characters long, including spaces.
Name:JEAN B
CLR CHANGE
–
–
You can press
press twice to return to the Terminals and Sets heading.
End of session
P0881591 Issue 01
Frequently used programming operations / 21
≠
Press
FIND
This is the name the display shows if you don't
change it. Press CHANGE.
Press the telephone's numeric dial pad button that
-->
has the first letter of the name until the display shows
the letter you want.
Press -->.
-->
Use the dial pad and --> until you have the entire
--> name.
'
Press
-->
®
Press to end your session.
once to continue programming this telephone, or
DN: on the display.
'
then .
to use the name you have entered.
Modular ICS 4.0 System Coordinator Guide