Using Passwords - Nortel Modular ICS 4.0 Manual

Modular system coordinator guide
Table of Contents

Advertisement

Services that have been turned on automatically are indicated
by an asterisk (*) before the name on the display. You can
neither manually activate nor cancel scheduled services,
although you can override them by manually turning on
another schedule.
The control telephone can override Services that are turned on
and off according to a schedule at any time by entering a
Services feature code, and selecting a different schedule. This
override remains in effect until it is canceled. If you select a
schedule with an asterisk (*), the next automatic service
schedule comes into effect at the programmed time.
Direct-dial calls to a direct-dial telephone ring at the extra-dial
telephone (the extra-dial telephone is designated by your
installer or customer service representative) only when you
enter the Ringing service feature code (
at that direct-dial telephone. Note that only the extra-dial
telephone is activated, not the actual Ringing service (unless
that direct-dial telephone is a control telephone).
Tip -
Night, Lunch, Evening, Sched 4, Sched 5, and Sched 6.
Your installer or customer service representative can
change these names to suit your business.

Using passwords

Your passwords prevent unauthorized or unintentional
changes to your Norstar system. To keep your telephone
service secure, distribute the password only to selected
personnel or make use of the basic password described below.
Record your password in a secure place and change it
periodically.
P0881591 Issue 01
Norstar provides six service schedules named
Using System features / 171
ƒ°‡⁄
Modular ICS 4.0 System Coordinator Guide
)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents