Turning The Redirect Ring For A Telephone On Or Off - Nortel Modular ICS 4.0 Manual

90 / Forwarding your calls
6. Press CHANGE to select Y (Yes) or N (No).

Turning the redirect ring for a telephone on or off

You can program a telephone to ring briefly (200
milliseconds) when a call is redirected on one of its lines.
You need the programming template found at the front of this
guide. See "Getting started with Norstar" on page 1 for more
ƒ••¤flfl‹››
information.
¤‹fl›fl
1. Press
2. Press
≠
password).
3. Press
≠
telephone you want to program.
"
4. Press
5. Press
Redirect ring:.
6. Press CHANGE to select Y (Yes) or N (No).
Tip -
briefly for redirected calls on one of its lines even if another
telephone set up the line redirection.
Displays while redirecting lines
Intercom
Line Redirection
QUIT ADD
Modular ICS 4.0 System Coordinator Guide
(the default System Coordinator
and enter the internal number of the
twice.
three times. The display reads
If a telephone has redirect ring enabled, it rings
You selected the intercom button as the
facility to place the call on. Enter a line pool
code or a destination code.
£
Press
REMOVE or REMOVE to cancel a previous
redirection.
•
or ADD to begin redirection. Press
.
P0881591 Issue 01