Parking A Call - Nortel Modular ICS 4.0 Manual

221 DND
Camp denied
Camp to:
CANCL
Camped: 221
Line001 hung up
Not in service
Release a call
For other displays, see "Common feature displays" on page 203.

Parking a call

You can suspend a call so that it can be retrieved from any
ƒ‡›
telephone in your system.
1. Press
P0881591 Issue 01
The person to whom you redirected a call
CALLBACK has Do Not Disturb active on the telephone.
The call has come back to you. Press the
CALLBACK button or the line button to
reconnect to the call. On the M7100
telephone, just pick up the receiver.
You have tried to camp an internal call. You
can only camp external calls.
Dial the number of the internal telephone to
which the call is sent.
The telephone to which you camped a call
CALLBACK did not answer the call. The call has come
back to you. Press CALLBACK or the line
button to reconnect to the call. On the M7100
telephone, just pick up the receiver.
A call you camped has come back to you, but
the caller hung up before you could
reconnect.
The telephone to which you have camped a
CALLBACK
call is out of service or is being used for
programming. The call has come back to
you. Press CALLBACK or the line button to
reconnect to the call. On the M7100
telephone, just pick up the receiver.
The line that the camped call is on is in use
or that line does not appear at your
telephone. Release the line or release an
internal line.
.
Transferring calls / 79
ƒ‡›
Modular ICS 4.0 System Coordinator Guide