Memory Buttons; One-Line Display - Nortel Modular ICS 4.0 Manual

Modular system coordinator guide
Table of Contents

Advertisement

˙
you to select a line button to take a call off hold, you press
˙
On M7100 telephones, you can answer a second call by
pressing
are connected to the waiting call. You can have no more than
two calls at a time.
The M7100 telephone cannot have a
applicable, special instructions for the M7100 telephone are
included with each feature description.

Memory buttons

Memory buttons are the buttons with indicators on the M7208,
M7310, and M7324 telephones, and the dual buttons without
indicators on the M7310 telephone. There is a single memory
button, without an indicator, on the M7100 telephone.
Memory buttons can be used as answer, autodial, line, and
programmed feature buttons. Line, intercom and answer
buttons must have indicators.

One-line display

The M7100 and M7208 telephones have a one-line display.
Other Norstar telephones have a second line on the display
which shows the functions of the three buttons directly below
it.
P0881591 Issue 01
on the M7100 telephone.
. Your active call is put on hold and you
General System features / 195
©
button. When
Modular ICS 4.0 System Coordinator Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents