Applying Button Cap Labels - Nortel Modular ICS 4.0 Manual

118 / Customizing your telephone
Enter code:
F__
QUIT
Feature code:
QUIT
Feature moved
Press a button
EXIT
Program and HOLD
Program and OK
QUIT
For other displays, see "Common feature displays" on page 203.

Applying button cap labels

ƒ•‚
Before you apply button labels, activate the Button Inquiry
feature (
to avoid activating features as you put the labels onto the
buttons. For more information refer to "Finding out what a
button does using Button Inquiry" on page 115.
Modular ICS 4.0 System Coordinator Guide
If you are checking a speed dial button, enter
the two-digit speed dial code that you want to
check.
Enter the feature code, or press
CLEAR
to quit programming or CLEAR to clear the
numbers you have entered. The system
accepts the entry as soon as you enter a
valid feature code.
Press
you want to assign to the button. You cannot
enter invalid codes.
You have programmed a button with a
feature that was already programmed onto
another button. The feature has moved to the
button you just programmed. Its original
button is now blank.
ƒ
Press the button you want to check. Press
Enter the number you want to program and
press
press
Enter the number you want to program and
˙
OK press OK. To erase the button, just press
ƒ
and enter the feature code
or EXIT when you are finished.
˙
˙
. To erase the button, just
.
or OK.
) to verify the button functions, and
®
or QUIT
P0881591 Issue 01