Making Calls - Nortel Modular ICS 4.0 Manual

Making calls

There are many ways to make a call, depending on the
programming and the type of call, as follows:
• Pick up the receiver and dial. The Norstar system supports
three methods of dialing. See "Changing how you dial
your calls" on page 57.
• Pick up the receiver, press a line button, and dial (if the call
©
is not on your prime line).
• Press
©
receiver). See "Using Handsfree/Mute" on page 45.
• Press
without the receiver and if the call is not on your prime
line).
• Press a line button and dial (to talk without the receiver and
if Automatic Handsfree is assigned to your telephone).
• Use one of the features that make dialing easier. See "Time
savers for making calls" on page 63.
Displays
221 busy
PRIORITY
9__
QUIT BKSP
95551234
P0881591 Issue 01
and dial (to talk without using the
, press a line button, and dial (to talk
The telephone you have called has no
LATER
internal lines available. Press LATER to use
the Ring Again or Message features or press
PRIORITY to make a priority call.
You are dialing using Pre-dial. To erase an
√
incorrect digit, press the left end of
complete, select a line or lift the receiver.
This prompt remains on your display as long
TRANSFER as you are on a call you have dialed. To
transfer the call, press TRANSFER.
or BKSP. When the number is
Modular ICS 4.0 System Coordinator Guide