Clearing A Call Log Password; Using Special Telephones; Direct-Dial - Nortel Modular ICS 4.0 Manual

Modular system coordinator guide
Table of Contents

Advertisement

174 / Using System features

Clearing a Call Log password

If an individual has forgotten their Call Log password, you can
clear it in programming. The individual can then enter a new
password from his or her telephone.
You need the programming template found at the front of this
guide. See "Getting started with Norstar" on page 1 for more
ƒ••¤flfl‹››
information.
¤‹fl›fl
1. Press
2. Press
'
password).
3. Press
'
4. Press
5. Press
6. Press
of the telephone where you want to clear the Call Log
password.
7. Press

Using special telephones

Direct-dial

You can reach the direct-dial telephone by dialing a single
digit. The direct-dial telephone is usually in a central location,
such as a attendant's desk. You can have up to five direct-dial
telephones for your Norstar system. It is usually the prime
telephone or the central answering position (CAP).
The direct-dial telephone can send up to 30 messages and can
invoke Services to activate the extra-dial telephone.
Modular ICS 4.0 System Coordinator Guide
(the default System Coordinator
four times.
at Passwords.
until the display reads Call log pswds.
and enter the internal telephone number
, then press CLR to clear the password.
.
P0881591 Issue 01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents