Table of Contents
Advertisement
Time savers for making calls
Storing a number on a memory button for Autodial
You can program memory buttons for one-touch dialing of
internal or external telephone numbers.
Buttons used for lines, answer or Handsfree/Mute cannot be
used as autodial buttons.
If the power to your Norstar system is off for more than three
days, autodial numbers (as well as some other system
programming) may be lost from the memory.
Adding an autodial button
ƒ•⁄
ƒ•¤
1. Press
2. Choose a button and then enter the number as if you were
dialing it.
When programming Autodial you can use:
•
Last Number Redial
•
Saved Number Redial
•
destination codes (choose
•
host system signalling
Choosing a line for Autodial
To include a line selection for an external number, press the
line or intercom button before you enter the number. To select
∆
a line pool, press a programmed line pool button, or press
P0881591 Issue 01
ƒ•⁄
to program an external number or
for an internal number.
and enter a line pool access code.
ƒ•¤
or
∆
as the line)
Modular ICS 4.0 System Coordinator Guide
Advertisement
Table of Contents
