Norstar Default Button Assignments; Rules Of Default Button Assignment - Nortel Modular ICS 4.0 Manual

Modular system coordinator guide
Table of Contents

Advertisement

120 / Customizing your telephone
3. Cover the Norstar Receiver Card underneath the receiver
of each telephone with the plastic lens.

Norstar default button assignments

During Startup, the Norstar installer chooses one of the
available templates. Default features are assigned
automatically to the programmable buttons on Norstar
telephones, and vary with the template and the telephone. The
default features are listed in the following tables in this
chapter.
Tips -
with the button caps in place for the Square template.
Please consult your customer service representative to
determine the type of template programmed into your
system before applying button assignments.

Rules of default button assignment

Line and Intercom buttons are assigned by default templates
and can be changed in programming. Handsfree/Mute and
answer buttons are not assigned by default. If these features
are defined, however, they are automatically assigned to
specific buttons, as described on this and the following page.
None of these buttons can be assigned to M7100 telephones.
The Handsfree/Mute feature appears on the bottom right-hand
button (the bottom button on the M7208 telephone), moving
the Intercom button(s) up one position.
Each telephone can have up to eight Intercom buttons. They
appear above the Handsfree/Mute button at the bottom right-
hand position on your telephone (the bottom button on the
M7208 telephone).
Modular ICS 4.0 System Coordinator Guide
Norstar telephones are shipped from the factory
P0881591 Issue 01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents