A Map For Working In Programming - Nortel Modular ICS 4.0 Manual

Programming buttons are active or inactive at different stages of
programming. A button is active (meaning you can use that
option), when the indicator next to it is lit (

A map for working in programming

The programming maps on the following two pages show the
ƒ••Ç؈ÏÈÌ
headings you'll see when you move through the display menu
after pressing
¤‹fl›fl
the password (the default password is
). The maps show you the choices under each
menu heading.
Another level of access is provided for special programming
instances (the default password is
SCPLUS).
A Basic password can be used with a limited number of feature
codes, including
call services on and off. For more information, see "Using
passwords" on page 171.
Terminals&Sets
Lines
Services
P0881591 Issue 01
••ÊȘ‰
Terminals and sets - Customize the many features
used by telephones. You can change where a call is
forwarded, give a telephone a name, or allow certain
features to be used at a telephone. You can change the
button programming on any telephone on the system.
Lines - Program names for each line.
Services - Turn services on or off. These are Ringing
service, (often called night service) that allows
additional telephones to ring, Restriction service that
blocks certain kinds of calls and Routing Service that
decides what lines a call uses.
Getting started with Norstar / 7
ª º
or
ÅΘȈ
‡¤‡fi°‡
and the codes for turning
Modular ICS 4.0 System Coordinator Guide
).
and entering
or
or