Radiator Removal - Polaris 2013 RANGER RZR S Service Manual

Radiator Removal

1. Remove the hood from the front cab.
WARNING
Never drain the coolant when the engine and
radiator are warm or hot. Hot coolant can cause
severe burns. Allow engine and radiator to cool.
2. Slowly remove the pressure cap to relieve any cooling
system pressure.
3. Place a suitable drain pan underneath the radiator
fitting on the front RH side of the vehicle.
4. Drain the coolant from the radiator by removing the
lower coolant hose from the radiator as shown.
Properly dispose of the coolant.
5. Allow coolant to completely drain.
6. Remove the front bumper (see Chapter 5).
7. Remove the upper engine outlet hose and recovery
hose from the top of the radiator.
Drain Here
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
ENGINE / COOLING
8. Remove the (2) upper radiator retaining bolts and the
(4) bolts retaining the lower radiator mount bracket.
Remove the bracket from the frame.
9. Disconnect the fan motor and remove the radiator
from the vehicle. Take care not to damage the cooling
fins.
10. Reverse procedure for installation.
Recovery
Hose
Engine
T-Fitting
Outlet Hose
Grommets
Engine
Inlet Hose
3
Fan Motor Asm.
Inserts
Radiator
Screws
3.13