Engine To Frame Ground - Polaris 2013 RANGER RZR S Service Manual

MAINTENANCE
7. Clean with electrical contact cleaner or a glass bead
spark plug cleaner only. CAUTION: A wire brush or
coated abrasive should not be used.
8. Measure gap with a wire gauge. Adjust gap if
necessary by carefully bending the side electrode.
Spark Plug Gap
Gap - .035" (0.90 mm)
9. If necessary, replace spark plug with proper type.
CAUTION: Severe engine damage may occur if the
incorrect spark plug is used.
10. Apply anti-seize compound to the spark plug threads.
11. Install spark plugs and torque to specification.
Spark Plug:
18 ft-lbs (24 Nm)
Recommended Spark Plug:
Champion RC7YC3
12. Install the plug caps to the appropriate cylinder by
referencing the MAG and PTO spark plug cap decals.
2.32
= T
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.

Engine To Frame Ground

Inspect ground cable connections. Be sure they are clean
and tight. The engine ground cable runs from the starter
motor to the chassis ground terminal.
RZR / RZR S
Ground Terminal
Engine
Ground Strap
RZR 4
Ground Terminal