Removal / Installation (Rzr 4) - Polaris 2013 RANGER RZR S Service Manual

FINAL DRIVE
6. Remove the fasteners retaining the plastic skid plate
and remove the skid plate from the vehicle.
Cupped
Washers
7. Remove the propshaft from the vehicle.
8. Reverse removal steps to reinstall propshaft. Use a
NEW Roll Pin (Spring Pin) upon reassembly.

Removal / Installation (RZR 4)

1. Locate the propshaft roll pin and use the Roll Pin
Removal Tool (PN 2872608) to remove the roll pin.
NOTE: Front wheel can be removed to gain better
access to the propshaft roll pin.
Roll Pin Removal Tool (PN 2872608)
2. Remove both front seats.
3. Remove the gear selector cap.
4. Remove the retaining screw and the gear selector
handle.
7.12
Screws
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
5. Remove the fasteners retaining the center console to
access the propshaft support bearing.
Cap
Screws
Torx Screws
6. Remove the (2) bolts and washers retaining the
support bearing.
Support
Bearing
7. Slide the rear portion of the propshaft back to separate
it from the front portion.
8. Slide the front portion of the propshaft back and away
from the front gearcase to remove it.
Torx Screw
Torx Screws
Remove