Polaris 2013 RANGER RZR S Service Manual page 130

ELECTRONIC FUEL INJECTION
5. Remove the bottom bolt that attaches the bracket to
the rear gearcase through the hole in the frame
support as shown.
Transmission
Mounting Bolts
6. Remove the (2) remaining fasteners that attach the
bracket to the side of the rear gearcase.
7. Remove the bolt from the bracket at the front of the
rear gearcase.
4.14
Rear Gearcase
Mounting Bolt
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
8. Lift the mounting bracket straight up and out from the
vehicle.
Remove
Bracket
9. Using a 5 mm hex wrench, remove the CPS retaining
bolt and remove the sensor from the magneto
housing.
10. Install new sensor using a light coating of oil on the
O-ring to aid installation.
11. Torque the CPS retaining bolt to specification.
CPS Retaining Bolt:
25 in-lbs (2.8 Nm)
= T