Starter Installation; Starter Drive Bendix - Polaris 2013 RANGER RZR S Service Manual

ELECTRICAL

Starter Installation

1. Lubricate and install a new O-ring (B) onto the starter
motor.
2. Install the starter motor onto the engine.
3. Install the upper and lower starter mounting bolts by
hand.
4. Torque the upper
specification.
5. Torque the lower
specification.
6. Install the negative (-) battery cable to the lower
mounting bolt. Install battery cable nut and torque to
specification.
7. Install the positive (+) battery cable to the starter
motor.
8. Install seat base and connect the battery.
A
B
Starter Motor Mounting Bolts:
7 ft-lbs (9.5 Nm)
10.36
starter mounting bolt
starter mounting bolt
= T
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.

Starter Drive Bendix

The engine's stator cover must be removed in order to
service the starter drive bendix. Refer to "Starter Drive
Bendix Removal / Installation", located in Chapter 3.
to
A
to
B
A. Gear Assembly 
B. Thrust Washer 
C. Busing
D. Retaining Ring 
E. Thrust Washer 
F. Stopper
G. Cover
H. Spring
H
G
E
C



F
D