Polaris 2013 RANGER RZR S Service Manual page 144

Hide thumbs Also See for 2013 RANGER RZR S:
Table of Contents

Advertisement

ELECTRONIC FUEL INJECTION
7. Remove the rear seat support by removing the 5/16"
fastener and 7/16" fastener retaining the right side of
the rear seat support. Remove the 7/16" fastener from
the left side of the rear seat support. Remove the rear
seat support from the vehicle.
Remove
Do Not Remove
8. Remove both fuel tank bracket fasteners. Move the
fuel tank brackets out of the way for removal of fuel
tank.
Tank Brackets
4.28
Remove
Only remove this
fastener from the
left side of the
rear seat support
Tank Bracket
Fasteners
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
9. Disconnect the fuel pump electrical harness.
10. Remove fuel tank vent hose clamp with a suitable
pliers and remove vent line from the tank vent fitting.
11. While holding a shop towel over the fuel line
connector, disconnect the quick connect fuel line from
the fuel pump. Move the fuel line out of the way for
tank removal.
NOTE: A small amount of fuel may come out of the
fuel line or tank. Properly drain fuel into a suitable
container.
Disconnect
Here

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 ranger rzr 4

Table of Contents