Polaris 2013 RANGER RZR S Service Manual page 38

MAINTENANCE
4. Reinstall the fill plug and torque to specification.
Fill Plug:
40-50 ft-lbs (54-68 Nm)
Lubricant Change:
The drain plug is located on the bottom right side of the
rear gearcase.
1. Remove the fill plug.
2. Place a drain pan under the drain plug.
3. Remove the drain plug and allow the lubricant to drain
completely.
4. Clean the drain plug.
5. Reinstall the drain plug with new O-ring and torque to
specification.
Drain Plug:
30-45 in-lbs (3-5 Nm)
6. Add the recommended lubricant. Maintain the fluid
level even with the bottom threads of the fill plug hole.
2.24
= T
= T
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
7. Reinstall the fill plug and torque to specification.
Fill Plug:
40-50 ft-lbs (54-68 Nm)
8. Check for leaks. Dispose of used lubricant properly.
= T