Engine / Transmission Separation - Polaris 2013 RANGER RZR S Service Manual

48. Lift the front portion of the assembly out first to allow
the engine valve cover to clear the vehicle frame.
Standard RZR
Shown
49. Remove propshaft from the transmission output shaft.
50. Then move assembly towards the front of the vehicle
while lifting it out to allow the rear gearcase to clear
the rear portion of the frame.
51. Then lift assembly high enough to clear vehicle frame
and completely remove it from the vehicle to a work
bench.

Engine / Transmission Separation

Once the engine / transmission / rear gearcase assembly
has been removed from the vehicle, the engine and
transmission will need to be separated to allow engine
servicing. Use the following procedure to separate the
engine from the assembly.
1. Remove the drive belt, drive clutch and driven clutch
(see Chapter 6).
Allow valve cover
to clear frame
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
ENGINE / COOLING
2. Remove the (6) fasteners retaining the inner clutch
cover to the engine and transmission.
3. Remove only the (4) outer fasteners retaining the
engine to the transmission bracket.
4. Tilt the assembly up and remove the remaining (2)
nuts that retain the transmission to the engine.
5. Carefully separate the engine and perform the
required service (see "Engine Disassembly and
Inspection").
3
3.25