Caliper Removal - Polaris 2013 RANGER RZR S Service Manual

BRAKES

Caliper Removal

1. Elevate and safely support the front of the vehicle.
2. Remove the (4) wheel nuts and the front wheel.
CAUTION
Use care when supporting vehicle so that it does not
tip or fall. Severe injury may occur.
3. Clean caliper area before removal.
4. Place a container below the caliper to catch brake fluid
when removing the line. Remove brake line from
caliper.
RZR / RZR S
RZR 4
9.12
Remove
Brake Line
Remove
Brake Line
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
5. Loosen brake pad adjustment set screw 2-3 turns to
allow brake pad removal after the caliper is removed.
6. Remove the two caliper mounting bolts and remove
the caliper assembly from the front hub.
RZR 4
Shown
Remove