FINAL DRIVE
4. Inspect the ring gear and differential gears for
chipped, worn, or broken teeth.
5. Remove the bearing from the top portion of the
differential assembly. Inspect the bearing for
smoothness and wear.
6. Remove the shim(s) from the differential assembly.
Be sure to keep the shims together for reassembly.
7.46
Inspect Teeth
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
7. Remove the bearing from the lower portion of the
differential assembly. Inspect the bearing for
smoothness and wear.
8. Remove the shim(s) from the differential assembly.
Be sure to keep the shims together for reassembly.
9. Inspect each differential bearing and race for signs of
wear or damage. If bearing replacement is required,
use standard bearing puller tools to remove the
bearing races.