Gearcase Removal - Polaris 2013 RANGER RZR S Service Manual

Hide thumbs Also See for 2013 RANGER RZR S:

Table of Contents

When the clutch gear is unlocked the rear drive shafts are

dependent on the differential allowing tighter turns. When

it's locked it becomes a solid rear axle increasing traction.

Differential

Unlocked Mode

9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual

Gearcase Removal

1. Drain the fluid from the rear gearcase and remove the

rear drive shafts from each side of the rear gearcase.

See "REAR DRIVE SHAFT" on page 7.29

2. Remove the exhaust pipe and exhaust silencer to

allow for gearcase removal.

3. Remove upper A-arm bolts, lower rear A-arm bolts

and suspension plate. NOTE: If accessory rear rack

cab frame is installed, remove the (4) bolts

retaining it to the suspension plate (see photo).

4. Remove the (2) rear gearcase mount bracket

fasteners and mount bolt and remove bracket from

Table of Contents

2013 ranger rzr 4