Fuel Tank Installation - Polaris 2013 RANGER RZR S Service Manual

Hide thumbs Also See for 2013 RANGER RZR S:
Table of Contents

Advertisement

12. Lift the rear of the fuel tank up first and carefully lift the
fuel tank up and out from the vehicle.
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
ELECTRONIC FUEL INJECTION

Fuel Tank Installation

1. Carefully reinstall the fuel tank assembly.
2. Reinstall the (2) fuel tank brackets and fasteners.
3. Reinstall the (3) shift lever support bracket fasteners
(RZR / RZR S).
4. Reinstall the rear RH fender well and secure with
fasteners (RZR / RZR S only). Reinstall the rear RH
panel divider and secure with fasteners (RZR 4).
5. Reinstall the seat belt mechanism and secure the
lower bolt.
6. Reinstall the RH rocker panel and all previously
removed fasteners.
7. Reinstall the rear seat base / support assembly and
secure with the fasteners.
8. Reinstall the center console and shift knob (RZR /
RZR S only).
9. Install the fuel line, vent hose and clamp. Verify they
are secure.
10. Reconnect the fuel pump electrical harness.
11. Reconnect the negative battery cable. Test the fuel
pump by turning the ignition key on and listening for
the pump to activate. Check for leaks.
12. Finally, install the rear service panel along with the
seats.
4
4.29

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 ranger rzr 4

Table of Contents