Polaris 2013 RANGER RZR S Service Manual page 287

Gearcase Removal
1. Stop engine and place gear selector in Park.
2. Refer to "FRONT DRIVE SHAFT - Drive Shaft
Removal" and remove both front drive shafts from the
front gearcase.
3. Remove the propshaft
SERVICE").
4. Disconnect the wire harness above the front gearcase
and remove the harness from the retaining dart.
5. Remove the vent line from the front gearcase.
6. Remove the (4) bolts securing the front gearcase to
frame.
Disconnect
Harness
Remove
4 Bolts
(see "PROPSHAFT
AWD Harness
Remove
Vent Line
Gearcase image is
for reference only.
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
7. Remove the gearcase from the front LH wheel well
area and slide it between the upper and lower A-arm.
Gearcase Disassembly / Inspection
1. Drain and properly dispose of gearcase fluid.
Remove any metal particles from the drain plug
magnet.
2. Remove the (7) cover screws and remove the cover
plate assembly.
FINAL DRIVE
7
7.19