37. Install shaft seal with ceramic surface facing inward.
38. Install water pump impeller (P). Secure the impeller
with the washer and a new nut (Q). Torque the nut
to specification.
P
Water Pump Impeller Nut:
108 6 in-lbs (6.8 0.68 Nm)
Q
= T
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
ENGINE / COOLING
39. Install water pump cover (R) with new O-ring seal.
Torque bolts to specification in proper sequence (see
Page 3.4).
96 ± 12 in-lbs
(10.85 ± 1.35 Nm)
Water Pump Housing Bolt:
96 12 in-lbs (10.85 1.35 Nm)
Torque in proper sequence
40. Sparingly apply Starter Drive Grease (PN 2871423) to
the starter drive. Install the starter bendix.
NOTE: There are thrust washers on both sides of
starter drive.
Install the O-ring dry
No lubricants
R
= T
3.57
3