Using The Snap-On Modem Module - Symbol PDT 8000 Series Product Reference Manual

PDT 8000 Series Product Reference Guide

Using the Snap-On Modem Module

To charge the terminal's battery using the Snap-On Modem Module, setup as shown below:
AC Line
The terminal charge LED blinks amber to indicate that the terminal battery is charging and
turns solid amber when charging is complete. The battery usually charges in two hours or
less, but may take up to four hours to fully charge. See
16 for other indications.
1-10
Cord
Power
Supply
Terminal
Charge LED
Snap-On
Modem Module
DC Cable
Charge LED Indicator on page 1-