2 - 30 MC909X Integrator Guide
Modem Module
This section describes how to setup and use the MDM9000 Modem Module.
Line In Port
Phone Port
Modem Module
Figure 2-30
The Modem Module enables data communication between the mobile computer and a host computer, remotely
through the phone lines, and synchronizes information between the mobile computer and a host computer.
The following items are required for a modem connection:
Telephone number, IP address and DNS/WINS address information from the dial-in server administrator
•
Dial-in account on the host system, including a user ID and password
•
RJ11 or RJ12 modem cable
•
Functioning telephone jack that supports plug-in modems connected to the local telephone system
•
Setup of Country Codes to use the modem with the appropriate country's telephone network.
The following items are required for communication:
MC909X mobile computer
•
Cable Adapter Module (CAM), Symbol p/n ADP9000-100 (see
•
Serial Adapter Cable (for communication via cradle), Symbol p/n 25-63856-01
•
Microsoft ActiveSync
•
Setup of host computer and mobile computer.
Serial Port
LEDs
Cable Adapter Module on page
2-24)