Using The Snap-On Modem Module - Symbol PDT 8000 Product Reference Manual

Using the Snap-On Modem Module

To charge the terminal's battery using the Snap-On Modem Module, setup as shown below:
Figure 1-5. Attaching the Snap-On Modem Module to the Terminal
The terminal charge LED blinks amber to indicate that the terminal battery is charging and
turns solid amber when charging is complete. The battery fully charges in less than four
hours, if the terminal is not in use. See
indications.
Charge LED Indicator
Getting Started
Terminal
Charge LED
Snap-On
Modem Module
on page 1-22 for other
1-11