Configuration Of Store To Usb; Step 1 Available Usb Memory Devices; Centreware Internet Services Setting Items - Fuji Xerox Versant 80 Press User Manual

Configuration of Store to USB

This section describes how to configure the machine to use the Store to USB service.

Step 1 Available USB Memory Devices ...................................................................................................................................589

CentreWare Internet Services Setting Items.........................................................................................................................589

Step 1 Available USB Memory Devices
The Store to USB service allows you to directly save the scanned data to a USB 2.0 memory
device which is inserted into the USB memory slot on the control panel of the machine.
USB 2.0 memory devices
USB memory devices with the capacity of up to 128 GB
USB memory devices that support FAT12, FAT16, FAT32, or VFAT (long name)
Note
CentreWare Internet Services Setting Items
You can enable/disable the Store to USB service using CentreWare Internet Services. When
you disable the service, the Store to USB button is not displayed on the Services Home
screen, and you cannot use the service.
The Store to USB service is set to enabled by factory default.
For details on the setting items, click [Help] at the upper right corner of CentreWare Internet Services screen to see help.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.557).
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
• USB memory devices that are encrypted with software cannot be used with the machine.
connect to the internet. The communication fee shall be borne by you.

Configuration of Store to USB

589
17