Fuji Xerox Versant 80 Press User Manual page 818

22 Problem Solving
Error Code
026-719 [Cause]
[Remedy] Wait for a while and execute the operation again. If the error still is not resolved, contact
026-720
[Cause]
[Remedy] Confirm the amount of available space.
026-721 [Cause]
[Remedy] Check the following conditions:
026-722
[Cause]
[Remedy] Initialize the USB memory device on a computer with the following file format, and then
Note
026-724 [Cause]
026-725
[Remedy] Contact our Customer Support Center.
22
026-726
[Cause]
[Remedy] Modify the machine configuration information in the print driver screen to match the
026-727
[Cause]
[Remedy] Take one of the following measures:
026-730
[Cause]
[Remedy] Check whether the paper guides are correctly positioned in the tray, and then try again.
026-736 [Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
026-737
[Cause]
[Remedy] Consult your network administrator whether the network or the server have any
026-738 [Cause]
[Remedy] Execute the operation again.
818
Cause and Remedy
An error occurred while operating the Store to USB service.
our Customer Support Center.
The capacity of the USB memory device of the recipient is insufficient while performing
the Store to USB service.
An error occurred while operating the Store to USB service.
The USB memory device is inserted into the USB memory slot.
The USB memory device is accessible from your computer.
The unencrypted USB memory device is used.
The USB memory device is not initialized.
execute the operation again.
Supported file formats: FAT12, FAT16 (FAT), FAT32
• NTFS is not supported.
• A software-encrypted USB memory device is not supported.
If the error still is not resolved, contact our Customer Support Center.
An error occurred while connecting to the EP system via the Internet.
The machine configuration information at a print job specification does not match the
actual machine configuration.
actual machine configuration.
Probable causes are as follows:
1)Unusable characters are included in the path name of the file location.
2)The length of the path name of the file location (including extension) exceeds the
number of characters available.
1)Change the path name of the file location.
2)Set the path in the range of 1 to 255 bytes.
The size of paper loaded in the specified tray is unknown.
An internal error occurred while sending the scanned document to the HTTP server.
Support Center.
Unable to send the scanned document to the HTTP server because a network error
occurred.
problem.
The machine failed to send scanned document data to the HTTP server because Web
application is closed during it.