Fuji Xerox Versant 3100 Press Optional Units Manual
  1. Manuals
  2. Brands
  3. Fuji Xerox Manuals
  4. Printer
  5. Versant 3100 Press
  6. Optional units manual

Fuji Xerox Versant 3100 Press Optional Units Manual

Hide thumbs Also See for Versant 3100 Press:
Table of Contents

Advertisement

Quick Links

Download this manual
Versant 3100 Press
Optional Units Manual
2nd High Capacity Feeder C1-DS
Interface Decurler Module
Inserter
High Capacity Stacker
Crease/Two-sided Trimmer
Folder Unit
Finisher
SquareFold Trimmer
Finishing Transport

Advertisement

Table of Contents
loading

Related Manuals for Fuji Xerox Versant 3100 Press

Summary of Contents for Fuji Xerox Versant 3100 Press

  • Page 1 Versant 3100 Press Optional Units Manual 2nd High Capacity Feeder C1-DS Interface Decurler Module Inserter High Capacity Stacker Crease/Two-sided Trimmer Folder Unit Finisher SquareFold Trimmer Finishing Transport...
  • Page 2 Fuji Xerox is not responsible for any direct or indirect damages arising from or caused by such data loss. Fuji Xerox is not responsible for any breakdown of machines due to infection of computer virus or computer hack- ing.

  • Page 3: Preface

    Thank you for selecting the Versant 3100 Press. The Versant 3100 Press is a color printing system that quickly processes data from client computers and delivers high-quality outputs. The Versant 3100 Press consists of the printer unit and a variety of optional units as well as a Print Server.

  • Page 4: Table Of Contents

    Table of Contents Preface..............................................3 Table of Contents..........................................4 Types of Manuals..........................................6 Using This Manual..........................................7 Chapter 1 2nd High Capacity Feeder C1-DS................10 1.1 Machine Components ............................10 1.2 Paper Jams.................................. 12 1.2.1 Paper Jams in Tray ..............................12 1.2.2 Paper Jams inside the Right Side Cover......................14 1.2.3 Paper Jams in the Paper Feeding Unit .......................17 Chapter 2 Interface Decurler Module..................18 2.1 Machine Components ............................
  • Page 5 5.1 Machine Components ............................40 5.2 Trimmer Waste Container ............................ 43 5.3 Paper Jams.................................. 44 Chapter 6 Folder Unit ........................53 6.1 Machine Components ............................53 6.2 Output Paper................................54 6.3 Paper Jams.................................. 55 Chapter 7 Finisher..........................59 7.1 Machine Components ............................60 7.2 Output Paper................................

  • Page 6: Types Of Manuals

     supplied with the device. PDF Manual The Manuals are stored as PDF files on the Versant 3100 Press Instruction Manuals CD. Double-click "index.html" and select the language of the manual you wish to display.  Versant 3100 Press Optional Units Manual (this manual) Describes how to replace consumables and how to clear paper jams in the optional units (High Capacity Stacker, Finisher, and others).

  • Page 7: Using This Manual

    Using This Manual This manual is intended to provide first-time users of the Versant 3100 Press with necessary information such as operating procedures and precautions on using the optional units. Organization of This Manual This manual identifies components as well as covers procedures to clear paper jams for each of the optional units.
  • Page 8  Chapter 7 Finisher  Chapter 8 SquareFold Trimmer  Chapter 9 Finishing Transport Optional Units Manual...
  • Page 9 Conventions This manual uses the following symbols: Indicates important information you have to know or be reminded before operations. Important Indicates supplemental information useful for operations. Note Indicates references to other chapters and manuals. Refer < > Indicates the Control Panel, and buttons and lamps on the printer or optional units. Indicates the names of tabs, options, buttons, menus and file names on the touch screen display.

  • Page 10: Chapter 1 2Nd High Capacity Feeder C1-Ds

    Chapter 1 2nd High Capacity Feeder C1-DS Machine Components................10 Paper Jams....................12 1.2.1 Paper Jams in Tray....................12 1.2.2 Paper Jams inside the Right Side Cover ............ 14 1.2.3 Paper Jams in the Paper Feeding Unit............17 For detailed information on how to load paper, refer to "2.3 Loading Paper" in the Printer Unit Manual, and Refer how to clean the printer, refer to "4.3 Cleaning the Printer"...
  • Page 11 Circuit Breaker Switch The switch is normally in the upper position. Breaker switch If the machine will be moved or unused for an extended period of time, turn off the switch by pressing it to the lower position. Note When fault current is detected, the circuit breaker is automati- cally turned off to discontinue the electrical flow.

  • Page 12: Paper Jams

    1.2 Paper Jams If there is a paper jam, the printing will be canceled. The Error Message area of the touch screen will show the affected area in red, along with the message. Also, the error lamp on the top of the machine will illuminate. If there is a paper jam in the following area, tap the [Faults] and the [Faults] screen will appear, explaining how to remove jammed papers.
  • Page 13 Remove jammed papers.  When Lamp E5 is Lit................................p.13  When Lamp E6 is Lit................................p.13  When Lamp E7 is Lit................................p.14 Note Solutions differ depending on where the paper jam occurs. Confirm the jammed area in the Error Message area. The code (E) on the upper-left part of the message indicates which error lamp on the top of the machine is illuminating.

  • Page 14: Paper Jams Inside The Right Side Cover

    When Lamp E7 is Lit (1) Pull out the Tray 9 toward you until it stops. Before pulling out the Tray, make sure no paper is jammed inside the right side cover. Important (2) Remove jammed papers. (3) Make sure the long-side and short-side paper guides are positioned to just touch the paper, and then push the Tray into the machine.
  • Page 15 When Lamp E1 is Lit (1) Open lever "1a" to the right ( ) and turn knob "1c" counterclockwise ( ). Remove jammed papers ( (2) Return lever "1a" to its original position. When Lamp E2 is Lit (1) Open lever "1d" to downward ( ) and turn knob "1c"...
  • Page 16 (4) Return levers "1a" and "1b" to their original positions. When Lamp E3 is Lit (1) Open lever "1b" to the right ( ) and turn knob "1c" counterclockwise ( ). Remove jammed papers ( (2) Return lever "1b" to its original position. When Lamp E4 is Lit (1) Open lever "1d"...

  • Page 17: Paper Jams In The Paper Feeding Unit

    (3) Return lever "1d" to its original position. Close the cover. 1.2.3 Paper Jams in the Paper Feeding Unit Follow the steps below to clear paper jams in the paper feeding unit. Note The "E5" error lamp of the High Capacity Feeder C3-DS will illuminate. Pull out the top cover of the High Capacity Feeder C3-DS toward you until it stops.

  • Page 18: Chapter 2 Interface Decurler Module

    Chapter 2 Interface Decurler Module Machine Components................18 Curl Correction...................19 Paper Jams....................21 2.1 Machine Components Component Description Error lamp Illuminates when a paper jam occurs. If the lamp is blinking, you must first clear the paper jam. Decurl button Press this button to correct the curl. This function is to correct the curl while sheets are being printed.

  • Page 19: Curl Correction

    2.2 Curl Correction By pressing decurl buttons, you can correct the paper curl caused by heat and pressure. As far as the printer is powered on, the decurl buttons function regardless of whether the printer is running or idle. This curl correction function is intended to be used during printing. Fine adjustment according to the char- ...
  • Page 20 Curl correction modes and functions of the decurl buttons Press the <AUTO> button to switch to the "AUTO" mode. Indicator Mode Function AUTO Automatically corrects paper curl. Normally it is recommended to select this mode. The module selects the optimal curl adjustment method, depending on the size and delivery orientation of the printed output.

  • Page 21: Paper Jams

    2.3 Paper Jams If there is a paper jam, the printing will be canceled. The Error Message area of the touch screen will show the affected area in red, along with the message. Also, the error lamp on the top of the machine will illuminate. If the lamp is blinking, you must first clear the paper jam.
  • Page 22 Open lever "1a" downward ( ) and turn knob "1b" counterclockwise ( ). Remove jammed papers ( Make sure you turn the knob 10 times or more.  When removing the jammed paper, carefully Important  remove it by gently pulling it out. Note The jammed paper may be hidden behind the upper covering.

  • Page 23: Chapter 3 Inserter

    Chapter 3 Inserter Machine Components................23 Loading Paper....................25 Paper Jams....................26 3.1 Machine Components Component Description Inserter Tray (Tray T1) Load paper to be used for separators or covers sheets. Error lamp Illuminates when a paper jam occurs. If the priority unit lamp is blinking, you must first clear the paper jam. Decurl button Use this button if paper curl still persists after setting the curl correction level to the highest (or the lowest) on the Interface Decurler Module.
  • Page 24 Specifications Item Specification Paper size Standard size Maximum A3, 13 x 19" Minimum JIS B5 Custom size Height 182.0 - 330.2 mm Width 148.0 - 488.0 mm Paper weight 52 - 350 g/m Note Make sure you use Bypass Tray when using the combination of the following paper types and Saddle Stitch / Bi-fold, because the combination can cause misalignment of folding positions and wrinkle: Coated Paper weighing 127 g/m...

  • Page 25: Loading Paper

    3.2 Loading Paper Load paper to be used for separators or covers sheets (blank or printed sheets). The Inserter Tray is used for feeding separator or cover sheets. These sheets are not printed by the machine. Up to 250 sheets (Colotech+90) can be loaded. Note If any paper remains in the Tray, remove the paper first, and put the paper and the new papertogether, ...

  • Page 26: Paper Jams

    3.3 Paper Jams If there is a paper jam, the printing will be canceled. The Error Message area of the touch screen will show the affected area in red, along with the message. Also, the error lamp on the top of the machine will illuminate. If the priority unit lamp is blinking, you must first clear the paper jam.
  • Page 27 When Lamp E1 is Lit (1) Open the cover, and remove jammed papers and all paper loaded in the Tray. When two or more sheets of paper are loaded, remove all sheets. Important (2) Fan the paper you removed and make sure all four corners are aligned correctly.
  • Page 28 (5) Return lever "1c" to its original position. (6) Close the cover. When Lamp E3 is Lit (1) Open the cover of the Inserter. (2) Open lever "1d" downward ( ) and turn knob "1e" counterclockwise ( ). Remove jammed papers ( Note The jammed paper may be hidden behind the upper covering.
  • Page 29 (5) Return lever "1a" to its original position. (6) Close the cover. Check the curl direction of jammed paper, and correct paper curl. Refer For information about the Curl Correction, refer to "2.2 Curl Correction" (p.19). Chapter 3 Inserter...

  • Page 30: Chapter 4 High Capacity Stacker

    Chapter 4 High Capacity Stacker Machine Component................30 Output Paper....................32 4.2.1 Output Trays......................32 4.2.2 Control Buttons....................32 Paper Jams....................33 4.1 Machine Component Component Description Error lamps Illuminates when a paper jam occurs. Sample button Press this button to output a sample sheet to the output tray. Paper eject button Press this button to stop printing and remove paper.
  • Page 31 Circuit Breaker Switch The switch is normally in the upper position. If the machine will be moved or unused for an extended period of Breaker switch time, turn off the switch by pressing it to the lower position. Note When fault current is detected, the circuit breaker is automati- cally turned off to discontinue the electrical flow.

  • Page 32: Output Paper

    4.2 Output Paper 4.2.1 Output Trays The High Capacity Stacker has two output trays: the stacker tray Output tray and the output tray. Unnecessary sheets purged by Purge function are ejected to the Stacker tray output tray. Refer Which output tray to be used is specified on your Print Server. ...

  • Page 33: Paper Jams

    4.3 Paper Jams If there is a paper jam, the printing will be canceled. The Error Message area of the touch screen will show the affected area in red, along with the message. Also, the error lamp on the top of the machine will illuminate. If there is a paper jam in the following area, tap the [Faults] and the [Faults] screen will appear, explaining how to remove jammed papers.
  • Page 34 Note Solutions differ depending on where the paper jam occurs. Confirm the jammed area in the Error Message area. The code (E) on the upper-left part of the message indicates which error lamp on the top of the machine is illuminating. Refer If the jammed long paper is lying across more than one unit, refer to "3.3.4 Long Paper Jam"...
  • Page 35 (2) Open lever "1b" upward ( ) and turn knob "1a" counterclockwise ( ). Remove jammed papers. ( (3) Return lever "1b" to its original position. (4) Close the cover. When Lamp E3 is Lit (1) Open the top cover of the High Capacity Stacker. (2) Open lever "1b"...
  • Page 36 (4) Open lever "2b" upward ( ) and turn knob "2c" counterclockwise ( ). Remove jammed papers ( (5) Return lever "2b" to its original position. (6) Close the cover. When Lamp E4 is Lit (1) Open the top cover of the High Capacity Stacker. (2) Open lever "2a"...
  • Page 37 When Lamp E5 is Lit (1) Open the top cover of the High Capacity Stacker. (2) Open lever "2b" upward ( ) and turn knob "2c" counterclockwise ( ). Remove jammed papers ( (3) Return lever "2b" to its original position. (4) Close the cover.
  • Page 38 (3) Pull out the stacker cart slowly and remove jammed papers. (4) Push the stacker cart back into its original position. (5) Close the cover. When Lamp E7 is Lit (1) Remove any paper coming out at the exit of the out- put tray.
  • Page 39 (5) Open lever "2a" downward ( ) and remove jammed papers ( (6) Return lever "2a" to its original position. (7) Close the cover. When Lamp E8 is Lit (1) Open the top cover of the High Capacity Stacker. (2) Open lever "3b" upward ( ) and turn knob "3a"...

  • Page 40: Chapter 5 Crease/Two-Sided Trimmer

    Chapter 5 Crease/Two-sided Trimmer Note Only the GX Print Server model supports the crease feature. Machine Components................40 Trimmer Waste Container..............43 Paper Jams....................44 5.1 Machine Components Component Description Error lamp Illuminates when a paper jam occurs. If the priority unit lamp is blinking, you must first clear the paper jam. Waste full lamp This lamp starts lighting when it is time to empty the waste container, and blink when the waste container becomes full.
  • Page 41 Specifications Item Specification Two-sided Trim Paper size Standard size Maximum A3, 13 x 19" Minimum A4, Letter (8.5 x 11") Custom size Height 194.0 - 330.2 mm Width 210.0 - 488.0 mm (trim and crease: - 386.0 mm) Paper weight Uncoated 52 - 350 g/m Coated...
  • Page 42 Trimmed and Creased Areas 210 - 488 mm 386 mm or smaller (trim and crease) 194.0 - 330.2 mm (trim) Trim 182.0 - 330.2 mm (crease) Feed direction a: 12 mm or larger A=B: 6 - 25 mm Crease b - e: 25 mm or larger (*) If this size, measured from the leading edge of paper sheet, is less than 45 mm, printing cannot occur.

  • Page 43: Trimmer Waste Container

    5.2 Trimmer Waste Container When it is time to empty the Waste Container, the waste full lamp starts lighting. This indicates you need to empty the container. (You can do this while the printer is running.) After that, the message appears on the Error Message area telling you that the Waste Container is full. At this point, the waste full lamp changes from lighting to blinking.

  • Page 44: Paper Jams

    5.3 Paper Jams If there is a paper jam, the printing will be canceled. The Error Message area of the touch screen will show the affected area in red, along with the message. Also, the error lamp on the top of the machine will illuminate. If the priority unit lamp is blinking, you must first clear the paper jam.
  • Page 45 Remove jammed papers.  When Lamp E1 is Lit................................p.45  When Lamp E2 is Lit................................p.46  When Lamp E3 is Lit................................p.47  When Lamp E4 is Lit................................p.48  When Lamp E5 is Lit................................p.48  When Lamp E6 is Lit................................p.49  When Lamp E7 is Lit................................p.50 ...

  • Page 46: When Lamp E2 Is Lit

    When Lamp E2 is Lit (1) Turn knob "2" counterclockwise to align the mark on the knob with the unlock position (a mark resem- bling an open padlock). (2) Open lever "1a" downward ( ) and lever "1b" down- ward ( (3) Turn knob "1c"...

  • Page 47: When Lamp E3 Is Lit

    (6) Turn knob "2b" counterclockwise ( ) and remove jammed papers ( (7) Return levers "1d" and lever "2a" to their original positions. When Lamp E3 is Lit (1) Turn knob "2" counterclockwise to align the mark on the knob with the unlock position (a mark resem- bling an open padlock).

  • Page 48: When Lamp E4 Is Lit

    When Lamp E4 is Lit (1) Open lever "2c" downward ( ), lever "2d" upward ) and lever "2e" to the right ( (2) Turn knob "2f" clockwise ( ) and remove jammed papers ( Note Grasp the leading edge of the jammed sheet, and pull out the sheet to remove it.

  • Page 49: When Lamp E6 Is Lit

    (2) Turn knob "3c" clockwise ( ) and remove jammed papers ( (3) Turn knob "2f" counterclockwise ( ) and remove jammed papers ( (4) Return levers "3a" and lever "3b" to their original posi- tions. When Lamp E6 is Lit (1) Open lever "3a"...

  • Page 50: When Lamp E7 Is Lit

    (3) Open lever "4a" to the right ( ) and turn knob "2f" counterclockwise ( ). Remove jammed papers Note Hold lever "4a" while turning knob "2f". (4) Turn knob "3c" clockwise ( ) and remove jammed papers ( (5) Return levers "3a", lever "4b" and lever "4c" to their original positions.

  • Page 51: When The Lamp Does Not Go Out

    (3) Return lever "3a" to its original position.  When the Lamp Does Not Go Out (1) Remove the supplied poker (stick) that is inside the cover. (2) Open lever "3a" to the right ( ) and open lever "3d" to the right ( (3) Use the poker to sweep waste around the Trimmer Unit into the Trimmer Waste Container.
  • Page 52 (6) Make sure there is no waste left inside, especially, beneath the frame that is located behind the container. Use the poker to remove any waste left inside. Refer For information about the container, refer to "5.2 Trimmer Waste Container" (p.43). Close the cover.

  • Page 53: Chapter 6 Folder Unit

    Chapter 6 Folder Unit Machine Components................53 Output Paper....................54 Paper Jams....................55 6.1 Machine Components Component Description Tri-fold output tray Receives output sheets. Tri-fold output tray button Press this button to open the tri-fold output tray. For detailed information about the Fold Adjustment, refer to "Profiles" in the Stock Library Manager Manual. Refer Specifications Item...

  • Page 54: Output Paper

    6.2 Output Paper Tri-fold Output Tray Tri-fold Output Tray Button C-Fold or Z-Fold jobs can be delivered to this tray only. Tri-fold Output Tray Button When you press the button, the lamp begins to flash. When the tri-fold output tray is unlocked (the button lamp illuminates), pull out the tri- fold output tray.

  • Page 55: Paper Jams

    6.3 Paper Jams If there is a paper jam, the printing will be canceled. The Error Message area of the touch screen will show the affected area in red, along with the message. Also, the error lamp on the top of the Finisher will illuminate. If the priority unit lamp is blinking, you must first clear the paper jam.

  • Page 56: Message Area

    Remove jammed papers.  When Lamp E10 is Lit ................................p.56  When Lamp E11 is Lit ................................p.56  When Lamp E12 is Lit ................................p.57 Note Solutions differ depending on where the paper jam occurs. Confirm the jammed area in the Error Message area.
  • Page 57 (2) Return lever "2g" to its original position. When Lamp E12 is Lit (1) Pull out tri-fold output tray "2d". (2) Open lever "2e" to the right ( ) and turn knob "2c" counterclockwise ( ). Remove jammed papers (3) Return lever "2e" to its original position. (4) If you have difficulty in removing jammed papers, open lever "2f"...
  • Page 58 (5) Return lever "2f" to its original position. (6) Return the tri-fold output tray "2d" to its original position. Close the cover. Check the curl direction of jammed paper, and correct paper curl. Refer For information about the Curl Correction, refer to "2.2 Curl Correction" (p.19). Optional Units Manual...

  • Page 59: Chapter 7 Finisher

    Chapter 7 Finisher Note In this manual, "Finisher D6", "Finisher D6 Plus" and" Finisher D6 with Booklet Maker" may be collec- tively called "Finisher". Machine Components................60 Output Paper....................64 7.2.1 Output Trays......................64 7.2.2 Control Buttons....................66 Staple Cartridge..................67 7.3.1 Replacing the Cartridge..................67 7.3.2 Staple Faults ......................

  • Page 60: Machine Components

    7.1 Machine Components Component Description Error lamp Illuminates when a paper jam occurs. If the priority unit lamp is blinking, you must first clear the paper jam. Output tray Receives output sheets. Finisher tray Receives output sheets. Booklet tray* Receives output sheets. Booklet output button* Press this button to move delivered booklets to a place where they can be removed.
  • Page 61 Specifications Item Specification Tray type Output tray collate / stack Finisher tray collate (offsetting supported) /stack (offsetting supported) Booklet tray collate / stack Paper size Output tray Standard size Maximum A3, 13 x 19" Minimum Postcard (100 x 148 mm) Custom size Height 98.0 - 330.2 mm...
  • Page 62 Item Specification Punch Paper size Standard size Maximum A3, Tabloid (11 x 17") (with Punch Unit) Minimum 2-hole or 3-hole JIS B5 4-hole A4, 16K Custom size Height 203.0 - 297.0 mm Width 182.0 - 431.8 mm Paper weight Uncoated 52 - 220 g/m Coated 72 - 200 g/m...
  • Page 63 Staple: Output Capacity (standard value) Side Stitch Saddle Stitch A4 or smaller Larger than A4 Paper weight (g/m Uncoated Coated Uncoated Coated Uncoated Coated 52 - 59 60 - 71 72 - 80 81 - 90 91 - 105 106 - 128 129 - 150 151 - 176 177 - 220...

  • Page 64: Output Paper

    7.2 Output Paper CAUTION Never touch the paper output area of the Finisher during operation. It may cause injuries.  Waste staples may come out with output paper. Be careful not to get injured by the staples.  Do not staple punched holes of paper. Sharp points of a staple may cause injuries. ...
  • Page 65 Pull out Output Tray from the lower seating (A) by pulling it rightward, and then insert the clutches at the lead edge of the tray into upper seating (B). In normal use, Output Tray should always be seated at the lower seating. Important If you keep using it at the upper seating, it may cause, for example, output sheets stacked on Output Tray to...

  • Page 66: Control Buttons

    7.2.2 Control Buttons Booklet Output Button Press this button to move delivered booklets to a place where they Booklet output button can be removed. Note If SquareFold Trimmer is installed, pressing this button moves delivered booklets to the position where to remove from the booklet tray installed on SquareFold Trimmer.

  • Page 67: Staple Cartridge

    The message appears on the Error Message area telling you that it is time to replace the cartridge. When the message appears, please replace the cartridge. Using the Staple Cartridge not recommended by Fuji Xerox may affect print quality or performance pro- vided by the Finisher. Use the Staple Cartridge that Fuji Xerox recommends for the Finisher.
  • Page 68 Insert a new staple cartridge into the unit. Insert the unit to its original position. Close the cover. Staple Cartridge for Saddle Stitch Type of supply Product code Quantity / box Staples Type XE CWAA0856 5,000 staples x 2 sets / 1 box Make sure the printer has stopped operations, and then open the right cover of the Finisher.

  • Page 69: Staple Faults

    7.3.2 Staple Faults Follow the procedures on the following pages when printed sheets are not stapled or staples are bent. Contact your local Fuji Xerox representative if the problem persists after you have tried the following solu- tions. Unstapled Bent staple If printed sheets are stapled as shown in the figures below, contact your local Fuji Xerox representative.
  • Page 70 Be careful not to get injured when removing jammed staples. Insert the unit to its original position. Close the cover. If you cannot remove the staples by performing the above procedures, contact your local Fuji Xerox repre- sentative. Optional Units Manual...
  • Page 71 Staple Cartridge for Saddle Stitch Make sure the printer has stopped operations, and then open the cover of the Finisher. Pull out the Saddle Stitch Unit "3" toward you until it stops. While holding the tabs on the staple cartridge, pull out the cartridge to remove it.

  • Page 72: Re-Inserting The Staple Cartridge

    Push the Saddle Stitch Unit "3" gently into the machine until it stops. Close the cover. If you cannot remove the staples by performing the above procedures, contact your local Fuji Xerox repre- sentative. 7.3.3 Re-inserting the Staple Cartridge If a staple cartridge has been inserted incorrectly or removed accidentally, perform the following proce- dures to re-insert the staple cartridge into the cartridge unit.
  • Page 73 Turn the unit upside while holding the lever, and then take out the staple cartridge from the unit. Tear the outside staples along the line as shown in the figure. CAUTION When tearing staples, be careful not to hurt your fingers. Insert the staple cartridge into the unit.

  • Page 74: Waste Container

    7.4 Waste Container 7.4.1 Staple Waste Container The message appears on the Error Message area telling you that the Staple Waste Container is full. When the message appears, please replace the Staple Waste Container. CAUTION Be careful not to get injured by waste staples when detaching the Staple Waste Container. Keep the printer powered on when replacing the Waste Container.
  • Page 75 Staple Waste Containers no longer needed have to be disposed of properly. Do not disassemble the contain- Important ers and return them to your local Fuji Xerox represen- tative. Insert the new Staple Waste Container from the lower end into its original position.

  • Page 76: Hole Punch Waste Container

    7.4.2 Hole Punch Waste Container The message appears on the Error Message area telling you that the Waste Container is full. When the message appears, please dispose of the paper scraps. Keep the printer powered on when disposing of the waste. If powered off, the printer does not recognize ...

  • Page 77: Paper Jams

    7.5 Paper Jams If there is a paper jam, the printing will be canceled. The Error Message area of the touch screen will show the affected area in red, along with the message. Also, the error lamp on the top of the machine will illuminate. If the priority unit lamp is blinking, you must first clear the paper jam.
  • Page 78 Open the cover of the Finisher. Remove jammed papers.  When Lamp E1 is Lit................................p.78  When Lamp E2 is Lit................................p.79  When Lamp E3 is Lit................................p.79  When Lamp E4 is Lit................................p.80  When Lamp E5 is Lit................................p.80  When Lamp E6 is Lit................................p.80 Note Solutions differ depending on where the paper jam occurs.
  • Page 79 (3) Return lever "1a" to its original position. When Lamp E2 is Lit (1) Open lever "1c" to the right ( ) and turn knob "1e" clockwise ( ). Remove jammed papers ( Note The jammed paper may be hidden behind the upper covering.
  • Page 80 When Lamp E4 is Lit (1) Open lever "1d" to the right ( ) and turn knob "1e" clockwise ( ). Remove jammed papers ( (2) Return lever "1d" to its original position. When Lamp E5 is Lit (1) Open lever "1d" to the right ( ) and turn knob "1f"...

  • Page 81: Paper Jams In The Saddle Stitch Unit

    (2) Open and close the cover of the Finisher. Close the cover. Check the curl direction of jammed paper, and correct paper curl. Refer For information about the Curl Correction, refer to "2.2 Curl Correction" (p.19). 7.5.2 Paper Jams in the Saddle Stitch Unit Follow the steps below to clear paper jams in the Saddle Stitch Unit.
  • Page 82 When Lamp E7 is Lit Note When the Finishing Transport is installed, refer to "7.5.3 Paper Jams in the Paper Feeding Unit" (p.84). (1) Open lever "3a" to the left ( ) and remove jammed papers ( (2) If you have difficulty in removing jammed papers, pull out the Saddle Stitch Unit "3"...
  • Page 83 (2) Turn knob "3b" counterclockwise ( ) and remove jammed papers ( (3) Push the Saddle Stitch Unit "3" gently into the machine until it stops. When Lamp E9 is Lit (1) Turn knob "3b" clockwise ( ) and remove jammed papers from the booklet tray exhaust ( Close the cover.

  • Page 84: Paper Jams In The Paper Feeding Unit

    7.5.3 Paper Jams in the Paper Feeding Unit Follow the steps below to clear paper jams in the paper feeding unit. Paper jams in this area can occur only when Finishing Transport is installed. Open the cover of the Finisher. Remove jammed papers.

  • Page 85: Chapter 8 Squarefold Trimmer

    Chapter 8 SquareFold Trimmer Machine Components................85 Output Paper....................87 8.2.1 Output Trays......................87 8.2.2 Spine-flattener Strength Adjustment Button......... 87 Trimmer Waste Container..............88 Paper Jams....................89 8.1 Machine Components Component Description Left side cover Open this cover to clear paper jams. Right side cover Open this cover to clear paper jams.
  • Page 86 Circuit Breaker Switch If the machine will be moved or unused for an extended period of TEST button time, turn off the switch by pressing. Note When fault current is detected, the circuit breaker is automati- cally turned off to discontinue the electrical flow. Do not touch the breakers under normal condition.

  • Page 87: Output Paper

    8.2 Output Paper 8.2.1 Output Trays Output Tray Unnecessary sheets purged by Purge func- Output tray tion are ejected to the output tray of the Finisher. Booklet Tray Saddle Stitch / Bi-Fold and/or Trim / square fold jobs can be delivered to this tray only. Booklet tray 8.2.2 Spine-flattener Strength Adjustment Button...

  • Page 88: Trimmer Waste Container

    8.3 Trimmer Waste Container The message appears on the Error Message area telling you that the Waste Container is full. When the message appears, please dispose of the paper scraps. Keep the printer powered on when disposing of the waste. If powered off, the printer does not recognize the container has been emptied.

  • Page 89: Paper Jams

    8.4 Paper Jams If there is a paper jam, the printing will be canceled. The Error Message area of the touch screen will show the affected area in red, along with the message. Also, the error lamp on the top of the machine will illuminate. If there is a paper jam in the following area, tap the [Faults] and the [Faults] screen will appear, explaining how to remove jammed papers.
  • Page 90 When Lamp E1 or E2 is Lit (1) Press the button on the left side cover of the Square- Fold Trimmer to open it. (2) Remove jammed papers. (3) If you have difficulty in removing jammed papers, open the cover of the Finisher. (4) Turn knob "3b"...
  • Page 91 (2) Remove jammed papers. (3) Close the cover. Chapter 8 SquareFold Trimmer...

  • Page 92: Chapter 9 Finishing Transport

    Chapter 9 Finishing Transport Machine Components................92 Paper Jams....................93 9.1 Machine Components Component Description Error lamp Illuminates when a paper jam occurs. Cover Open this cover to clear paper jams. Note The Finishing Transport is required to connect the 3rd Vendor Finisher to the Finisher D6 Plus (note that the 3rd Vendor Finisher may be unavailable in some countries or regions).

  • Page 93: Paper Jams

    9.2 Paper Jams If there is a paper jam, the printing will be canceled. The Error Message area of the touch screen will show the affected area in red, along with the message. Also, the error lamp on the top of the machine will illuminate. If there is a paper jam in the following area, tap the [Faults] and the [Faults] screen will appear, explaining how to remove jammed papers.
  • Page 94 Remove jammed papers.  When Lamp 1 is Lit ................................p.94  When Lamp 2 is Lit ................................p.94  When Lamp 3 is Lit ................................p.95  When Lamp 4 is Lit ................................p.95 Note Solutions differ depending on where the paper jam occurs. Check the error lamp on the top of the ...
  • Page 95 When Lamp 3 is Lit (1) Open lever "3" to the left ( ) and turn the knob clockwise ( ). Remove jammed papers. (2) Return lever "3" to its original position. When Lamp 4 is Lit (1) Open lever "4" downward ( ) and turn the knob clockwise ( ).

  • Page 96: Index

    Finisher.................... Finishing Transport ..............Folder Unit..................High Capacity Stacker .............. Inserter.................... Interface Decurler Module............SquareFold Trimmer..............Versant 3100 Press Optional Units Manual Author - Fuji Xerox Co., Ltd. Edition 1 - August 2016 Publisher - Fuji Xerox Co., Ltd. ME6852E2-3...

Table of Contents