Fuji Xerox Versant 80 Press User Manual page 785

Error Code
017-735 [Cause] Device usage is prohibited.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
017-737
[Cause] Data could not be sent due to memory capacity shortage.
[Remedy] Have your system administrator stop or delete the unnecessary plug-ins.
If the error still is not resolved, switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power.
If the same message is displayed again, contact our Customer Support Center.
017-738
[Cause] Data could not be sent due to an internal error.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
017-739
[Cause] Data could not be sent due to an internal error.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
017-740 [Cause] Data could not be sent due to a plug-in activation failure.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
017-741 [Cause] The job flow cannot be activated.
[Remedy] Take one of the following measures:
017-742 [Cause] An error occurred while connecting to the forwarding server.
[Remedy] Check the network connection and the address of the forwarding server.
017-743 [Cause] Cannot login to the forwarding server.
[Remedy] Confirm the user ID and the password.
017-744 [Cause] An error occurred while connecting to the forwarding server.
[Remedy] Confirm the following:
017-745 [Cause] Data could not be sent due to the lack of hard disk memory capacity.
[Remedy] Take one of the following measures:
017-746 [Cause] A hard disk error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
Cause and Remedy
Install the latest plug-in.
Confirm the job flow settings.
You can access to the same path using a computer.
There is enough memory capacity left in the storage destination.
Send with lower resolution.
Send in smaller size.
Send with fewer pages by dividing the job.
Send with [Black & White] set as the [Output Color].
Error Code
22
785