Software Download - Fuji Xerox Versant 80 Press User Manual

2
Select [New Encryption Key], and enter an encryption key, and then select [Save].
3
Select [Re-enter Encryption Key], enter the same encryption key, and then select [Save].
4
Select [Save] to display a confirmation screen. Select [Yes] on the screen to save the
setting.
Service Rep. Restricted Operation
Allows you to select whether or not to restrict the operation by our service representative to
protect the security settings from being altered by someone impersonating our service
representative.
Off
The operation by our service representative is not restricted.
On
Our service representative cannot change the following settings:
"Delete All Data" (P.438)
"Print Universal Unique ID" (P.445)
"Data Encryption" (P.453)
"Encryption Key for Confidential Data" (P.454)
"Service Rep. Restricted Operation" (P.455)
"SSL/TLS Settings" (P.486)
"S/MIME Settings" (P.487)
"IPSec Settings" (P.489)
"System Administrator Settings" (P.543)
"Maximum Login Attempts by System Administrator" (P.549)
"Overwrite Hard Disk" (P.552)
Creating/Changing Users with System Administrator Rights
Changing SNMP v3 Setting
When [On] is set, you can set a maintenance passcode of 4 to 12 digits in the [Maintenance
Passcode] screen.
Entering the passcode is required when our service representative performs maintenance.
Important • When [On] is set, note the followings:
Note
For information on the system administrator permissions, refer to "User Roles" (P.638).

Software Download

You can select whether or not to permit software downloading. This feature is for service
representative use. For more information, contact our Customer Support Center.
- If you lose the system administrator's user ID and passcode, the items restricted to the service
representative cannot be changed.
- If you lose the passcode, our service representative cannot perform maintenance in the case
when an error occurs in the machine.
• To change the restricted items or perform maintenance, the electric circuit board of the machine
must be replaced.
You will be charged for the electrical circuit board and handling cost.
Be sure not to lose the system administrator's user ID and passcode.
• An optional component is required to use this feature. For more information, contact our Customer
Support Center.
Common Service Settings
455
13