Fuji Xerox Versant 80 Press User Manual page 459

When [No Default] is selected, select the output color in the [Copy] screen before making
copies.
Output Color (Simple Copy)
Set the default value for [Output Color] in the [Simple Copy] screen. You can select from
[Auto], [Color], and [Black & White].
Single Color
Set the default value for [Single Color] in [More] of [Output Color] in the [Copy] screen. You
can select a color from six preset colors and six custom colors.
For information about custom colors, refer to "Custom Colors" (P.467).
Dual Color - Source Color
Set the default value for [Source Color] that appears when [Dual Color] is selected for [More]
of [Output Color] in the [Copy] screen.
Selecting [Color] enables you to select a color from six colors.
Dual Color - Target Area Color
Set the default value for [Target Area Color] that appears when [Dual Color] is selected for
[More] of [Output Color] in the [Copy] screen. You can select a color from seven preset colors
and six custom colors.
For information about custom colors, refer to "Custom Colors" (P.467).
Dual Color - Non-target Area Color
Set the default value for [Non-target Area Color] that appears when [Dual Color] is selected
for [More] of [Output Color] in the [Copy] screen. You can select a color from seven preset
colors and six custom colors.
For information about custom colors, refer to "Custom Colors" (P.467).
Original Type
Set the default value for [Original Type] in the [Image Quality] screen.
Original Type - Auto (Non-Black & White)
Set the default value for [Original Type] in the [Image Quality] screen.
This is valid when a color other than [Black & White] is selected for [Output Color] in the
[Copy] screen.
Original Type - Auto (Black & White)
Set the default value for [Original Type] on the [Image Quality] screen.
This is valid when [Black & White] is selected for [Output Color] in the [Copy] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] of [Image Options] in the [Image Quality] screen.
Contrast
Set the default value for [Contrast] of [Image Enhancement] in the [Image Quality] screen.
Sharpness
Set the default value for [Sharpness] of [Image Options] in the [Image Quality] screen.
Copy Service Settings
13
459