Optional Components - Fuji Xerox Versant 80 Press User Manual

Optional Components

The following table shows the optional components available. To purchase these options,
contact our Customer Support Center.
Product Name
Offset Catch Tray
Large Size UI Installation Kit
Large Size UI Installation Kit
2
C3 Finisher
C3 Finisher with Booklet
Maker
Punch Unit 2/4H CD1
Punch Unit US 2/3H CD1
Finisher D4
Finisher D5
Finisher D4 with Booklet
Finishing Transport Module
D4/D5 Folder Unit
2/3 Hole Punch Kit for
Finisher D4
Squarefold Trimmer Module
High Capacity Stacker
Stacker Cart
Interface Module
Description
Allows to eject paper with an offset.
A kit to set the Large Size UI Kit to the machine.
A kit to set the Large Size UI Kit to the machine with HCF B1-S or
High Capacity Feeder C3-DS.
Staples output.
Staples output. It also folds output in half or staples folded
output.
2/4 hole-punches output sheets.
Note • This kit is available only when the C3 Finisher or C3 Finisher
with Booklet Maker is installed.
2/3 hole-punches output sheets.
Note • This kit is available only when the C3 Finisher or C3 Finisher
with Booklet Maker is installed.
Staples or hole-punches output.
Inserter is installed for loading paper to be used as separators and
covers.
Note • The Finisher D5 is required to connect a 3rd vendor finisher.
Staples or hole-punches output. It also folds output in half or
staples folded output.
Inserter is installed for loading paper to be used as separators and
covers to bind booklets.
Connects a 3rd vendor finisher to the Finisher D5.
Used to fold sheets in Z-folded or C-folded form.
Note • This is available only when the Finisher D4, the Finisher D4
with Booklet, or Finisher D5 is installed.
The number of punching holes can be changed to 3.
Note • 2 and 4 punching cannot be used when this option is
installed.
• This is available only when the Finisher D4, the Finisher D4
with Booklet, or the Finisher D5 is installed.
Presses the spine of a booklet to form the square-shaped spine like
a book. It also trims the fore edge, which is opposite of the spine,
to finish the edge neatly.
Note • This option is available only when the Finisher D4 with
Booklet is installed.
Allows you to output up to 5,000 sheets of paper (when using FX P
Paper).
A cart for carrying paper output from the High Capacity Stacker.
Used when installing the Finisher D4, Finisher D4 with Booklet,
Finisher D5, or High Capacity Stacker to the machine.
®
Note • For GBC AdvancedPunch
with the device.

Optional Components

TM
, refer to the manual supplied
931
23