Fuji Xerox Versant 80 Press User Manual page 777

Error Code
016-596 [Cause] The machine failed to transfer data using FTP of the Scan to PC service because a
network error occurred.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
016-597 [Cause] The machine failed to transfer data using FTP of the Scan to PC service because a
network error occurred.
[Remedy] Stop all accesses from the other devices, and then execute the operation again. If the
error still is not resolved, contact our Customer Support Center.
016-598 [Cause] The size of an e-mail page exceeds the maximum message size because of page
splitting.
016-599
[Remedy] Take one of the following measures:
For more information on [Quality/File Size], refer to "Quality/File Size (Specifying an Image Compression Ratio When
Scanning)" (P.297).
For more information on [Maximum Split Count], refer to "Maximum Split Count" (P.507).
016-700
[Cause] The job was suspended because the number of the digits for the Secure Print or Charge
Print passcode set on the print driver was less than the value specified in [Minimum
Passcode Length for Stored Job] on the machine.
[Remedy] On the print driver, set the passcode string equal to or longer than the value specified in
[Minimum Passcode Length for Stored Job].
016-701 [Cause] Unable to process print data because of insufficient memory.
[Remedy] Stop unnecessary ports or delete unnecessary data to increase memory.
016-702 [Cause] Unable to process print data because of insufficient print page buffer.
[Remedy] Take one of the following measures:
For more information on the [Image Quality], refer to the help of the print driver.
016-703 [Cause] The machine received an e-mail specified with an invalid folder number.
[Remedy] For errors occurring during e-mail reception:
Take one of the following measures:
If the error still is not resolved, contact our Customer Support Center.
016-704
[Cause] The folder is full, and hard disk capacity is insufficient.
[Remedy] Delete unnecessary files from the folder, and save the file.
Refer to "Checking/Operating Files in a Folder" (P.309).
016-705
[Cause] You have not used the print driver for the machine.
[Remedy] Use the print driver appropriate for the machine.
If the error still is not resolved, contact our Customer Support Center.
016-706 [Cause] The hard disk space is insufficient because the number of Secure Print users exceeded
the maximum limit.
[Remedy] Delete unnecessary files from the machine, and delete unnecessary Secure Print users.
For more information on deleting users for Secure Print files, refer to "Printing and Deleting Stored Jobs" (P.362), and on
folders, refer to "Checking/Operating Files in a Folder" (P.309).
Cause and Remedy
Reduce the file size for [Quality/File Size].
Increase the value for [Maximum Split Count].
Set [Image Quality] to [Standard].
Increase the print page buffer size.
Register the specified folder number, and request the sender to send the e-mail again.
Request the sender to send to an available folder.
Error Code
22
777