Fuji Xerox Versant 80 Press User Manual page 465

The larger the value, the stronger the effect of removing background noise.
Background Suppression Level (Text)
Set the background suppression level for color copying. This setting is valid when [Text] is
selected for [Original Type] in the [Image Quality] screen.
The larger the value, the stronger the effect of removing background noise.
Photo & Text /Printed Original
Set the type of document when [Printed Original] of [Photo & Text] is selected for [Original
Type] in the [Image Quality] screen.
Normal
Copies with standard image quality.
Inkjet Originals
Select [Inkjet Originals] when copying a document printed with an inkjet printer. This
improves the recognition of inkjet colors.
Highlighted Originals
Select [Highlighted Originals] when copying an original marked with a highlight pen. This
improves the recognition of the colors of highlight pen.
Original Type - See-Through Paper
When [Text] is selected for [Original Type] in the [Image Quality] screen, set whether or not
to display [Text on See-Through Paper].
Face Up/Down Output - Reverse Order
Set whether or not to display [Face Up (Reverse Order)] under [Face Up/Down Output] in the
[Output Format] screen.
Face Up/Down - Auto (Single Sheet)
Specify the operation of the machine when [Face Up/Down Output] is set to [Auto] in the
[Output Format] screen, and a single sheet is output.
Default Trim Margin
Set the default value for the amount of edge trimmed from the output of a booklet. When
you specify trimming, the machine trims the fore edge of a booklet, opposite of the booklet
spine, to create a neat finished edge. Specify the value between 2.0 and 20.0 mm in 0.1 mm
increments.
Note
Auto Image Positioning - Below 105 gsm
Set the value for auto image positioning when you use 105 gsm or light paper. When you
set auto image positioning, the machine adjusts the image shifting so that the printing
positions on the inner and outer pages of a booklet remain consistent when they are folded.
Specify the value between 0 and 1.50 mm.
Auto Image Positioning - Above 106 gsm
Set the value for auto image positioning when you use 106 gsm or heavier paper. When you
set auto image positioning, the machine adjusts the image shifting so that the printing
positions on the inner and outer pages of a booklet remain consistent when they are folded.
Specify the value between 0 and 1.50 mm.
• An optional component is required. For more information, contact our Customer Support Center.
Copy Service Settings
13
465