Configuration For Ic Card Reader (Sold Separately); Step 1 Preparations; Step 2 Logout Method Using The Smart Card - Fuji Xerox Versant 80 Press User Manual

Configuration for IC Card Reader (Sold Separately)

You can use a smart card for authentication by comparing the information registered on the
smart card and the user information on the machine. You can also restrict the machine use
and perform accounting of the jobs using the information registered on the smart card.
This section describes the supported smart cards and how to register a smart card to use at
the machine.
Note
The following shows the reference section for card information and each procedure.

Step 1 Preparations .....................................................................................................................................................................655

Step 2 Logout Method Using the Smart Card.......................................................................................................................655

Step 3 Registering Smart Card Information..........................................................................................................................656
Step 1 Preparations
Two types of IC Card Reader are supported by the machine. Each IC Card Reader supports
following smart card types.
When using IC Card Reader
MIFARE
- Fuji Xerox IC Card (Type A)
- Other MIFARE compatible smart cards*
eLWISE/ELWISE (Type B)
- eLWISE
- ELWISE
®
FeliCa
- Fuji Xerox IC Card
- IC Card compatible with SSFC
- Other FeliCa compatible smart cards*
* : The embedded IC Card Reader of the machine may not support some smart cards.
When using IC Card Reader (supports HID))
HID-PROX*
* : The embedded IC Card Reader of the machine may not support some smart cards.
Note
Step 2 Logout Method Using the Smart Card
Perform the following steps to set how to logout authentication using the smart card.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
• An optional component is required to use this feature. For more information, contact our Customer
Support Center.
®
(Type A)
®
• When you confirm which IC Card Reader you use, contact our Customer Support Center.
• The default user ID is "11111".
• The default passcode is "x-admin".

Configuration for IC Card Reader (Sold Separately)

version 1.0 format
20
655