Replacing The Waste Toner Container - Fuji Xerox Versant 80 Press User Manual

5
Insert the toner cartridge in gently until it
stops.
Note
6
Close the machine front toner cover.
Note

Replacing the Waste Toner Container

When the waste toner container becomes full, a message appears on the touch screen.
Replace the waste toner container according to the message.
Please order a Waste Toner Container.
Waste Toner Container needs to be replaced.
* : The remaining page yield for copy/print jobs is applicable when A4 paper LEF (
depending on the conditions such as the content printed, paper size, paper type, and the machine operating environment.
WARNING
Never throw a waste toner bottle into an open flame. Toner may catch fire and
cause burn injuries or explosion. If you have a used waste toner bottle no longer
needed, contact your local Fuji Xerox representative for its disposal.
Important • When replacing the waste toner container, toner may spill and soil the floor. We recommend laying
1
Make sure that the machine has stopped, and
open the machine front door.
• Be sure to insert the toner cartridge until it
clicks into place.
• If the machine front toner cover is not completely closed, a message will appear and the machine
will remain paused.
Message
paper on the floor beforehand.
• Proper disposal of used waste toner container is required. The used waste toner container must be
returned to our Customer Support Center.
• The use of waste toner containers not recommended by Fuji Xerox may impair quality and
performance. Use only waste toner containers recommended by Fuji Xerox for the machine.
• Replace the waste toner container while the machine is on.
Replacing Consumables
Solution
Prepare a new waste toner container.
Note • Approximately 5,000 pages
copied or printed after the message
appears.
The machine will stop. Replace the waste toner
container with a new one.
) is used. The value is an estimate and varies
*
21
can be
665