Fuji Xerox Versant 80 Press User Manual page 432

13 Tools
Important • Align the paper guides against the paper to prevent paper jams or errors. If the machine cannot
For information about paper types available on the machine, refer to "Supported Paper Type/Loadable Quantity/Paper Feed
Method" (P.92).
Important • When you load non-standard size paper whose length (Y) is 100 to 181 mm in Tray 6 (HCF B1-S), be
For information on how to attach and remove the Post Card Kit, refer to "Loading Postcards" (P.115).
For more information, refer to "Supported Paper Type/Loadable Quantity/Paper Feed Method" (P.92).
13
Note
For information on [Adjust Paper Curl], refer to "Correcting the Curl of Outputs" (P.913).
432
detect a tray, use Tray 5.
Paper Type
Select the type of paper to load in the trays.
Paper Size
You can load both standard size paper and non-standard size paper. When you load non-
standard size paper, select [Custom Size], and then set the size in the X (width) and the Y
(length). The acceptable range may vary depending on the selected tray.
When you load non-standard size paper in Trays 1 to 3, set the size in the X (width)
between 182 and 488 mm and the Y (length) between 140 and 330 mm in 1 mm
increments.
When using Tray 6 (HCF B1), you can load standard size paper only. Select [Auto Detect].
When you load non-standard size paper in Tray 6 (HCF B1-S), select [Custom Size], and
then set the size in the X (width) between 148 and 488 mm and the Y (length) between
100 and 330 mm in 1 mm increments.
When you load non-standard size paper in Tray 6 and Tray 7 (High Capacity Feeder C3-
DS), select [Custom Size], and then set the size in the X (width) between 148 and 488 mm
and the Y (length) between 98 and 330 mm in 1 mm increments.
sure to use the Post Card Kit. When you load non-standard size paper whose length (Y) is 98 to 181
mm in Trays 6 and 7 (High Capacity Feeder C3-DS), be sure to use the Post Card Kit. Otherwise, an
error and paper jam occur. On the other hand, when you load non-standard size paper whose length
(Y) is 182 mm or more in the tray, be sure to remove the Post Card Kit from the tray. Otherwise, a
paper jam occurs.
Paper Type & Paper Weight
You can select the types and weight of paper loaded in a tray.
Paper Color
Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen to the left of [Type] on the [Paper Supply] screen.
Auto Paper Select
Set the condition for Auto Paper selection. When the color mode selected is used, Auto
Paper selection is enabled. Select from [All Colors], [Color], and [Black & White].
Automatic tray selection means that a tray containing the appropriate paper is
automatically selected by the machine for copying or printing.
Adjust Paper Curl
Adjust settings for removing curl from paper sheets. Select from [Default Value], [Type A],
[Type B], and [Type C], or [Type 1] to [Type 10].
• Only pre-registered adjustment types are displayed. You can register a adjustment type under
[Tools] > [System Settings] > [Common Service Settings] > [Paper Tray Settings] > [Custom Paper
Settings] > [Adjust Paper Curl], or under [Tools] > [System Settings] > [Common Service Settings] >
[Maintenance] > [Adjust Paper Curl].
Alignment Adjustment
Adjust settings for printed images (perpendicularity (rhombic distortion), skew, scale, and
print position). You can select from 80 adjustment types.