The Print Result Is Not What Was Expected - Fuji Xerox Versant 80 Press User Manual

Symptom
The data has
been sent to the
machine.

The Print Result is Not What was Expected

If the print result is not what was expected, identify the symptom in the following table to
perform the remedy.
Symptom
Cannot print in
color.
Outputs are not
stapled.
Paper is not
folded.
The document is
printed on a
different paper
size than
specified.
The image on the
document edges
is missing on the
output.
The printed font
differs from the
font specified on
the computer.
The printout is not
offset.
Printing is slow.
Cause
The machine is out of paper.
No paper is loaded for the
specified paper size.
Printing is interrupted by a
copy operation.
An error occurred in the
machine.
Cause
[Output Color] is set to [Black
and White].
The Finisher is not installed.
The number of pages to be
stapled exceeds the
maximum number for
stapling.
The Folder Unit is not
installed.
The document size is different
from the paper size loaded in
the specified tray.
The image is larger than the
printable area.
Font replacement is set on
the print driver.
The machine does not offer
the Offset feature.
[High Resolution] is selected
for [Image Quality].
Trouble during Printing
Remedy
Load paper in the machine.
Load paper of the size specified.
Refer to "Loading Paper" (P.104).
Cancel the interrupting operation.
Check the error details and take an
appropriate action.
Remedy
Set [Output Color] to [Auto Detect] or [Color].
The Finisher is required to staple. Install the
Finisher, or change the print option settings
to cancel stapling.
Reduce papers to be less than the maximum
number for stapling.
The maximum number of pages for stapling varies
depending on the used finisher.
Check the optional components installed on
the machine, and reconfigure the printer
configuration.
Change the size of paper in the tray, or
change the print option to specify a tray that
contains the correct sized paper.
Expand the printable area of the machine, or
reduce the image size on the printout.
Check the font replacement table.
To output offset, the Offset Catch Tray or the
Finisher is required.
When image data, such as photos, is printed
with the high resolution, the print speed
becomes slow. Select [Standard] for [Image
Quality].
22
745