Fuji Xerox Versant 80 Press User Manual page 820

22 Problem Solving
Error Code
027-514 [Cause]
[Remedy] Check the following conditions:
027-515 [Cause]
[Remedy] Take the following measures:
027-516
[Cause]
[Remedy] 1)Take one of the following measures:
22
027-518
[Cause]
[Remedy] Confirm the password for the shared folder.
027-520 [Cause]
[Remedy] Confirm the access privilege to the SMB server.
027-521 [Cause]
[Remedy] Change the file name or forwarding destination folder of the scan server. Or, try moving
820
Cause and Remedy
The machine failed to transfer data using SMB of the Scan to PC service because an
error has been occurred between the SMB server and the DNS server.
The SMB server is connected to the DNS server.
The SMB server name is registered on the DNS server.
The machine failed to transfer data using SMB of the Scan to PC service because an
error has been occurred.
Set the DNS server address.
Set the target SMB server address using IP address.
Probable causes are as follows:
1)The SMB server of the destination computer cannot be found while transferring data
using SMB of the Scan to PC service (TCP/IP session establishment failed).
2)The SMB server specified as the destination does not respond to the machine while
transferring data using SMB of the Scan to PC service.
3)Failed to name resolution of the SMB server specified as destination to transfer data
using SMB of the Scan to PC service.
- Confirm the connection of the network cable.
- For communications over subnet, confirm the WINS server settings, and check
whether the server address can be resolved correctly.
- File Sharing service (communicating via port 137 (UDP), port 138 (UDP), and port
139 (TCP)) is authorized for the Firewall settings of the destination SMB server.
2)Check whether the file sharing service is enabled on the destination SMB server.
- The file sharing service of Microsoft Network
If the error still is not resolved, check the following setting.
- NetBIOS over TCP/IP for TCP/IP is activated.
3)Take one of the following measures:
- When the destination SMB server name is specified using the FQDN (example:
mypc01.fuji0.co.jp), confirm that the DNS server address is set correctly in the
Connectivity & Network Setup of the machine.
- If the connection with the DNS server has any problem, check whether the
destination server name set in the machine is registered on the DNS server.
The machine failed to transfer data using SMB of the Scan to PC service because the
specified password was incorrect.
When the server is Macintosh, the specified user may not have been registered as a user
who is permitted to use File Sharing.
When the server is Macintosh, specify a user who is permitted to use File Sharing.
The machine failed to transfer data using SMB of the Scan to PC service because the file
name or folder name could not be retrieved.
The machine failed to transfer data using SMB of the Scan to PC service because the
suffix of the name of the file or folder exceeded the limit value.
or deleting the files within the forwarding destination folder.
®
is enabled.