Plug-In Settings; Other Settings - Fuji Xerox Versant 80 Press User Manual

13 Tools

Plug-in Settings

You can browse list of available Plug-ins when you use the custom authentication and set to
switch Plug-ins.
Note
Embedded Plug-ins
Set whether or not to use the embedded plug-ins.
Select [Enabled] or [Disabled].
List of Embedded Plug-ins
Display the embedded plug-in name and status on the list.

Other Settings

You can configure other settings related to the machine.
Offset Stacking (Right Top Tray)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Right Top Tray.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or
[Offset per Job] is selected, the machine slightly shifts the output position per set or per job
(print job) respectively.
Note
Offset Stacking (Right Middle Tray)
Offsetting means that each set of copies is delivered to the lower tray and shifted slightly to
separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Right Middle
Tray.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or
[Offset per Job] is selected, the machine slightly shifts the output position per set or per job
(print job) respectively.
Note
13
Offset Stacking (Stacker - Stacker Cart)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the High Capacity
Stacker - Stacker Cart.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or
[Offset per Job] is selected, the machine slightly shifts the output position per set or per job
(print job) respectively.
Note
446
• This item is displayed when the Extensible Customization Function is set to be enabled. For more
information on Extensible Customization Function, refer to "Passcode Setting for Extended
Functions" (P.978).
• An optional component is required to use this feature. An optional component is necessary. For
more information, contact our Customer Support Center.
• An optional component is required to use this feature. An optional component is required. For more
information, contact our Customer Support Center.
• An optional component is required. For more information, contact our Customer Support Center.