Pontiac Fiero 1988 Service Manual page 1317

5J-6 DOORS
29
30
31
32
33
OUTER BELT SEALING STRIP
INNER BELT SEALING STRIP
RETAINER FRONT
D O O R
TRIM
A T
BELT
FRONT FILLER SEALING STRIP
R E A R
FILLER SEALING STRIP
34 WATER DEFLECTOR
G 9 4 1 0 2
Fig. 6-Door Sealing Components
35
S E A L I N G
STRIPS
G 9 4 1 0 3
36
34 WATER DEFLECTOR
36 TAPE
G9A104
Fig 7-Door Inner Panel Water Deflector Sealing
Locations
Door Opening Weatherstrip
Remove or Disconnect (Figure 9)
1. Lower garnish molding. Refer to Section 3J.
2. Loosen quarter trim panel
3. Screws (39)
4. Door opening weatherstrip (38)
• Break bond between channel and
weatherstrip with a putty knife or
flat-bladed tool and a release agent.
Fig. 8-Door Inner Panel Water Deflector Tape Locations
o Start at any convenient location, grasp the
weatherstrip and pull from the pinch-weld
flange and channel; continue around entire
door opening.
Install or Connect (Figure 9)
Door opening weatherstrip (38)
# Apply a medium-bodied sealer in cavity of
weatherstrip
• Apply black weatherstrip adhesive to the
weatherstrip-to-channel stripping.