Pontiac Fiero 1988 Service Manual page 1367

9 J 4 SEATS
1 ROCKER ANCHOR PLATE
2 COVER TRIM
3 UPPER GUIDE LOOP ANCHOR PLATE
4 SEAT BELT WARNING HARNESS CONNECTOR
5 SEAT BELT WARNING CONNECTOR
6 RETRACTOR
G94165-9J-P
Fig. 2 Single Loop Belt S y s t e m
RECLINER CONTROL MECHANISM
3.
<--•
Remove or Disconnect (Figure S)
4.
1. Place seatback in full-up position
2. Recliner mechanism cover bolts (8) i.
3. Recliner mechanism cover (9) 2.
4. Recliner control mechanism (10) 3.
Install or Connect (Figure S)
4.
1. Seatback in full-up position
IS
2. Recliner control mechanism (10)
•
3. Recliner mechanism cover (9)
4. Recliner mechanism cover bolts (8) w
SEATBACK ASSEMBLY
m
4-+
Remove or Disconnect (Figure 5)
1. Seat assembly
2. Recliner mechanism cover (9) and attaching bolt
Inner hinge arm attaching bolt (11)
Seatback
Install or Connect (Figure 5)
Seatback
Inner hinge arm attaching bolt (11)
Recliner mechanism cover bolts (8) and cover (9)
Seat assembly
Inspect
For proper operation
Ease of lever operation and seatback movement
Positive locking action
Release lever should always return to normal
position.
SEAT TORQUE SPECIFICATIONS
The following torque specifications should be
used when servicing seat assemblies.