Pontiac Fiero 1988 Service Manual page 1328

DOORS 5J-17
4. Cam assembly - front door inner panel (101)
5. Bell crank and bracket assembly
6. Window regulator cam assembly
7. Remove block from glass and check operation
Rear Cam
4 » *
1.
2.
3.
4.
1.
2,
Remove or Disconnect (Figure 23)
Trim panel
Water deflector
Rear cam guide bolts (90, 91 and 92)
Rear cam guide
Install or Connect (Figure 23)
Rear cam guide
Rear cam guide bolts (90, 91 and 92)
Adjust
Cam assembly and tighten all bolts
]JP Inspect
3,
For proper operation
Water deflector
Trim panel
Front Glass Run Channel Assembly and Support
Assembly
1.
2.
3.
4.
5.
Remove or Disconnect (Figure 23)
Trim panel
Water deflector
Retainer support bolts (87 and 88)
Front glass run channel support bolt (89)
Front glass run channel
JHMhj
Install or Connect (Figure 23)
1. Front glass run channel
2. Front glass run channel bolt (89)
Retainer support bolts (87 and 88)
Adjust
Run channel and tighten bolts
Inspect
For proper operation of glass
4. Water deflector
5. Trim panel
Cam Assembly - Front Door Inner Panel
4=4
1.
2,
3,
4.
1.
2.
Remove or Disconnect (Figure 23)
Trim panel
Water deflector
Inner panel cam assembly bolts (98 and 99)
Inner panel cam assembly
Install or Connect (Figure 23)
Inner panel cam assembly
Inner panel cam assembly bolts (98 and 99)
ft
Adjust
Cam assembly and tighten bolts
Inspect
3.
4.
For proper operation of glass.
Water deflector
Trim panel
DOOR LOCK ASSEMBLY
Do not attempt to correct lock
discrepancies. Make correction through the
replacement of the lock assembly.
4-4
Remove or Disconnect (Figure 27)
1. Trim panel
2. Water deflector
9 RIVETS (1/4" DIA. x 1/2" ALUMINUM)
101 CAM ASSEMBLY — FRONT DOOR INNER PANEL
102 REGULATOR — ELECTRIC
G94117
Fig. 25-Window Regulator Assembly - Electric