DOORS 5J-21
| 4 « Install or Connect (Figure 29)
L Hinge assembly (105 or 108). Coat surface of
hinge strap that mates with body pillar with
medium-bodied sealer.
2. Bolts - hinge to body (106 or 109)
3. Bolts - hinge to door (107 or 110)
Important
Align hinge with marks previously made on body
and door.
g p y j
Tighten
•
8 mm bolts from 20 to 28 N-m (15 to 20
ft-lb)
•
10 mm bolt from 40 to 55 N-m (30 to 40
ft-lb)
4. Outer door panel assembly
13
>nspect
•
Door assembly engagement at striker -
adjust where necessary.
m Clearance between door panel and fender
panel - no more than 4 mm (5/32").
5. Noise control adhesive patch
6. Lower garnish molding