Install The Software - Meridian Link/Customer Controlled Routing Installation And Upgrade Manual

438 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Procedure 6: Load the operating system tape on an IPE Module or an
Application Module with an MVME167 card (continued)
Figure 185
BOS software management menu
The BOS (FE03.71) Software Management Menu
1 install Install FE03.71 BOS Software
2 upgrade Upgrade To FE03.71 BOS Software
---> Enter a number, a name, the initial part of name, or
? or <number>? for HELP, q to QUIT:
17 At the software management menu, type 1 and press [Return] to

install the software.

The BOS installation procedure begins.
Figure 186
BOS installation, phase 1
Phase 1. Identify Root And Usr File Systems Installation Disk Drive(s)
The BOS product supports root and usr file system installations
on the disk controllers listed below.
selection number, the second column is the name of the controller, and,
the third column is a brief description of the controller.
at the prompt the root file systemÕs installation disk controller type.
1 MVME147 The MVME147 CPU Processor/SCSI Controller
2 MVME167 The MVME167 CPU Processor/SCSI Controller
3 MVME323 The MVME323 ESDI Disk Controller
4 MVME327 The MVME327 SCSI Bus Controller
5 MVME328 The MVME328 SCSI Host Adapter
---> Enter a number, a name, the initial part of a name, or
? or <number>? for HELP, or q to QUIT [MVME167]:
18 The system prompts you to select the disk controller. Whether you
have an IPE Module or an Application Module, type 2 and press
[Return] to select the MVME167 SBC card (this option supports both
the IPE Module and the Application Module with an MVME167 card).
The system response is ÒSelected the ÔMVME167Õ controller type.Ó
The first column is the controllerÕs
Identify