Meridian Link/Customer Controlled Routing Installation And Upgrade Manual page 339

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 321
Table 115
LD 16ÑTrunk route administration (continued)
Prompt Response
DNIS YES
NDGT 1-(4)-31
ICOG xxx
ACOD xxxx
¥
¥
¥
REQ END
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Comment
ACD-Dialed Number Identification Service
(DNIS) route. The route must be configured
as one that provides DNIS digits. Only the
following types of routes can be configured
for DNIS: TIE/DID/WATS auto-terminating
or IDC routes, FEX IDC routes, and FGDT
routes.
Number of DNIS digits expected.
X11 Release 20 through 22: 1-(4)-7
X11 Release 23: 7, to program the feature
of a seven-digit DNIS
X11 Release 24: up to 31
Incoming and Outgoing trunk
IAO = In and out
ICT = Incoming trunk
OGT = Outgoing trunk
Access code for the trunk route
Press [Return] until the REQ prompt
appears
Exit the overlay, saving changes
Ñ end Ñ