Meridian Link/Customer Controlled Routing Installation And Upgrade Manual page 428

410 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Procedure 3: Load application software from tape (continued)
Figure 139
Reboot messages 2
Copyright Motorola Inc. 1988 - 1992, All Rights Reserved
M4120 Debugger/Diagnostics Release Version 1.1 - 09/30/92 (IR01)
COLD Start
Local Memory Found =01000000 (&16777216)
MPU Clock Speed =25Mhz
Autoboot in progress... To abort hit <BREAK>
Booting from: M4120, Controller 0, Drive 0
Loading: Operating System
.
.
Initializing For Applications
Configure Link 0 : successful
Configure Link 1 : successful
Configure Link 2 : successful
Enable Link 0 : successful
Enable Link 1 : successful
Enable Link 2 : successful
Application release successful
Starting Applications
06/01/94 20:55:53 Starting CCR Application...
Starting Customer Controlled Routing Processes...
Performing modem reset...
Connected
Sending atz
to the device.
Done modem reset.
The system is ready.
Console Login:
20 Remove the application tape from the cassette tape drive.
The appearance of the ÒConsole Login:Ó prompt indicates that the
new package is now installed. You may now log in to the system to
perform other commands. You may also restore configuration files
and data files from backup if necessary (Procedure 8: Restore
configuration files and data files from the backup tape).
(diagnostic messages)